5/31/10

Cooper Hand Tools T7670629 Display, 12" x 12" Wire Rope Clips and Thimbles Assortment

Cheap Cooper Hand Tools T7670629 Display, 12" x 12" Wire Rope Clips and Thimbles Assortment Review





Bucket Boss Brand 54006 Drill Holster

Cheap Bucket Boss Brand 54006 Drill Holster Review




You know the drill: drill use, leave somewhere, need to drill, drill fetch. repeat. Problem solved with this case. Well built, solid, valid for each year, I put in it. Has a STAP who goes on the handle that keeps drilling down when you're crawling. I am absolutely delighted with this platform, it is good, and has reduced my level aggravation my drill is always within reach. I feel the same about Bucket Boss Tool Bags too!


5/30/10

Malco TY4G Tensioning Tie Tool

Cheap Malco TY4G Tensioning Tie Tool Review




I have owned several Tensioning Tie tools by Malco. I liked the grips as they make a model without them that sometimes pinches your hand. The tie cutter eventually gets dull and nearly impossible to sharpen, but that is true for all of these type tools. I finally glued the grips on the tool as they get loose over time. I use the tool at work which is why I have owned many types including the automatic one. This is a good tool and does the job.


Milwaukee 2620-21 18-Volt Sawzall Kit with 1 Battery

Cheap Milwaukee 2620-21 18-Volt Sawzall Kit with 1 Battery Review




This saw is great! He seems to have more power than a regular 18V, but the best thing is the lithium-ion battery with fuel gauge "on the right of the battery that lets you know the level of charge remaining in the battery. This battery will go M18 and go full speed until it loses all costs and then it stops. Probably would not hurt to have a spare battery if you will be using a lot of work and do not want to wait 30-50 minutes it might take to recharge the battery. I used to cuta bunch of branches for about two hours and I still had juice left in the battery. This saw has enough power for what I use for (small trees, branches, 2x4 with or without nails, demo wooden fence, etc.), and the name of Milwaukee gives me an impression of quality. I highly recommend this does not live because it is a beast of burden, it seems so cool!


5/26/10

Cooper Hand Tools Campbell 0726427 Inco Chain Blu-Krome 3/0 (150FT/Reel)

Cheap Cooper Hand Tools Campbell 0726427 Inco Chain Blu-Krome 3/0 (150FT/Reel) Review





5/20/10

Cooper Hand Tools T7670429 Display, 12" x 12" Wire Rope Clips and Thimbles Assortment

Cheap Cooper Hand Tools T7670429 Display, 12" x 12" Wire Rope Clips and Thimbles Assortment Review





5/19/10

Klein Tool 608-3 1/8-Inch Cabinet Tip Miniature Screwdriver with 3-Inch Round Shank

Cheap Klein Tool 608-3 1/8-Inch Cabinet Tip Miniature Screwdriver with 3-Inch Round Shank Review




I work on elettronica and tired of cheep advanced pilot port or bending. I had the screwdrivers for about a year and they still have a good job. All my screwdrivers are Klien.


5/17/10

Stanley GR100 Glue-Pro DualMelt Glue Gun

Cheap Stanley GR100 Glue-Pro DualMelt Glue Gun Review




THE SILICON PISTOLA recibir THAT THE CON THAT NO coincide ORDENE, Hecho NI EN EL COLOR, QUE LA TAL COMO SE VE SIDS ES EN LA FOTO Y ME ENVIARON, UNA NEGRA Y DE OTRO MODELO, sin embargo funciona YY WELL PROBE ES TWO ... THE recomiendo UN EXCELENTE PRODUCTO, AH Y ES MUY GRANDE ...


5/15/10

SK Hand Tool (SK 6516) 1/2" x 6" Flat Chisel

Cheap SK Hand Tool (SK 6516) 1/2" x 6" Flat Chisel Review





5/14/10

SK Hand Tool 91719 Pro-Gun Long Barrel Air Hammer

Cheap SK Hand Tool 91719 Pro-Gun Long Barrel Air Hammer Review




That's what I bought an upgrade from a Husky "pro" of the air hammer shotgun, what a difference! Long and short gun hammers both have a place so its not apples to apples comparison, but it is an all around better made and effective tool.
I bought this place from the Snap On PH3050, the gold standard pneumatic hammers that cost less than $ 500
This thing is quiet (relatively speaking of course, include those earplugs!) A trigger fetherable Nice, light, andAnti-Shake Technology makes a big difference. It has decent power, the Snap-On gun still has fought in terms of brute force if.
Amended to add:
Well, unfortunately this tool will return to Amazon, it just does not have the power to buck rivets into the semi-trailers at the speed I need, it should work fine for most cars / light duty mechanics however.


5/11/10

Stanley 34-130 100-Foot FatMax Long Tape Rule

Cheap Stanley 34-130 100-Foot FatMax Long Tape Rule Review




I have a couple of 25 'Fat Max tape, and really like them, so I decided to give it a try.It is a good tool, but bare in mind that the gear ratio is 3:1 a crank handle for 3 towers within spool.This do for a quick return, but not ease of cranking. I felt myself about to break the grip of the first times I have it in realed. It seems to become more flexible with wear though.This may not be typical of each band, I may have received an extra tight one.I dought that you willdisappointed.


5/8/10

Bucket Boss Brand 54045 Rear Guard

Cheap Bucket Boss Brand 54045 Rear Guard Review




I do not wear a tool belt complete the work, but there are times when the Gerber multitool on my belt and the knife in my pocket does not suffice. Maybe I'm working on a ladder putting up hogstrough a whole, fitting some pipes through it, who knows what? This little guy is perfect for the job. I can put a wrench, a couple screwdrivers, some scissors and a Sharpie in it and it snaps on my belt. Then I can stay top of the ladder, without trying to balance my business on thetop. When I did this particular work, I can take the bag off, put those tools in rare cases where they belong in my tool bag, and put the bag again. Maybe the next job I'm stripping and a pipe cutter. Put them in the pocket, and until my departure. I do not have to make room for a belt great work. This, combined with a tape measure and a case of drilling (both cut independently on my belt) and I'm almost ready to go. Everything else I can not let my tool bag, generally. Iknow that some people need to maintain a full range of tools at their person, but if it seems excessive to you, try this one out. It also has a strong component in the back that can go in your pocket, if the belt clip does not work for you.


5/3/10

Stanley 11-961 5-Pack Regular Hook Blade

Cheap Stanley 11-961 5-Pack Regular Hook Blade Review





Sheffield 12703 One Hand Opening Lock-back Knife

Cheap Sheffield 12703 One Hand Opening Lock-back Knife Review





Cooper Hand Tools Xcelite HS11 Nutdriver 11/32 (1 EA)

Cheap Cooper Hand Tools Xcelite HS11 Nutdriver 11/32 (1 EA) Review





SKT-89106 E-TORX® Wrench - E6 x E8

Cheap SKT-89106 E-TORX® Wrench - E6 x E8 Review





5/2/10

Stanley 12-951 SpokeShave with Flat Base

Cheap Stanley 12-951 SpokeShave with Flat Base Review




First: when you buy a cutting tool, you should sharpen the blade. Aircraft will be listening. It does not need to be refined or tuned, and was in the form of work in 20 minutes, about average, in my experience, for woodworking tools Decent . After that, he worked like a charm. The rounded handles are interspersed with a little water if your hands get sweaty, but it is a fairly minor fault. The blade is excellent and holds its edge through many hours of formattingwhite oak staves, and the system 2-blade screw grader, if it has more to play in what I usually like, is solid when you have defined. It is a tool that should give a good service through at least two generations, all for under $ 20 - very good deal if you ask me.


Moody Tools 1 Hndl/5 Tips/2 Exten. Spring Tool Set

Cheap Moody Tools 1 Hndl/5 Tips/2 Exten. Spring Tool Set Review